Version 4.26 notes

For all release notes, see Tealium for Javascript release notes.

Overview

Load rules are re-evaluated for both utag.view() and utag.link() calls.

Changes to the way the utag.js 4.26 file handles query string parameters and meta tags means that they are no longer lower-cased by default. If you have query string parameters or meta tags identified as data sources in your profile, you may need to update those data source names in the Data Layer tab to match upper case and lower case letters exactly.

Custom script source is a blocking tag

A blocking tag is a tag that must run before any other tags run. When you enter the location for the custom script source advanced setting for a tag, this tag automatically becomes a blocking tag. This tag still loads asynchronously, but subsequent asynchronous scripts. For example, utag.10.js does not load until the blocking tag is complete.

Best Practice: If you want to load custom JavaScript for a tag but you do not want it to be a blocking tag, use the Tealium Generic Tag to load it.

Wait flag improvement

The wait flag is an advanced setting within tag configuration.

Tags whose Wait Flag is set to “No” load and fire immediately after the utag.js file loads. Those tags, whose Wait Flag is set to “No,” that load sooner may fire sooner, regardless of their order in Tag Management. For example, if Tag 2 loads before Tag 1, and Tag 1 is placed higher in the Tags tab in Tag Management, Tag 2 may still fire sooner, despite the order they’re in. Previously, tags executed in the order specified in Tag Management. These tags then waited for tags placed higher in the order to load before loading themselves.

This means that you may now have a mixture of tags with their Wait Flag set to ‘No’ and tags with their Wait Flag set to ‘Yes’ in the same profile.

Tracking calls load new tags

After the initial page load, subsequent calls to utag.view() re-evaluate load rules to load new tags. In previous versions, calls to utag.view could not load new tags. This feature is enabled by default in utag.js 4.26.

Disable this feature to keep current behavior. See utag.cfg.load_rules_ajax flag details below for more information.

A utag.link() call does not load a new tag. Only a utag.view() call does this.

Load a tag by UID

For advanced implementations, especially those using AJAX, use the utag.view() call to bring in a new tag and fire it based on the tag’s UID (as seen in the Tags tab of Tag Management). This bypasses all load rules.

utag.view({page_name : "New Page"}, null, [5]);

• Param 1: Data Layer
• Param 2: Callback function (or null)
• Param 3: Array of UIDs to load and fire

Read new meta tags

These types of meta tags with “name=” were picked up in a previous version of utag.js:

<meta name="keywords" content="Apple,Tab" />

The new utag.js 4.26 now picks up those with property= (see “Open Graph” meta tags)

<meta property="og:type" content="video.movie" /> 

Lowercase query string or meta variables

This is a logic change in the default behavior of utag.data. Set the utag.cfg.lowerqp flag to true to automatically lowercase. However, the default setting keeps the mixed case.

Set the utag.cfg.lowerqp flag to true for backward compatibility with previous utag.js behavior.

Set the utag.cfg.lowermeta flag to true to enable lower-casing for the meta tags. This only applies to the name of the name/value pair for that meta tag.

If you have mixed-case query string parameters, you need to update the data source’s name in the Data Sources tab to match exactly. Any code that refers to this query string type data source must also be updated.

New cookie values

There are new cookie name/value pairs in the utag_main cookie:

• utag_main_vid
  A long string to uniquely identify the visitor, such as 013efdc67183001adeec0eef13010a051001b00f0093c)
• utag_main__ss
  A “Session Start” flag. Set to "1" for the first page view of a new session. Default session time is 30 minutes elapsed with no activity.
• The session ID value in the utag_main_ses_id cookie
• The visitor ID value in the utag_main_v_id cookie
• The session start flag (0 or 1) found in the utag_main__ss cookie

(The previous cookie values utag_main__st and utag_main_ses_id are still set.)

Session tracking

A request for an empty file, utag.v.js, is made once at the start of a visitor session. This is used internally by Tealium to log the session count. The HTTP request URL looks like this:

http://tags.tiqcdn.com/utag/tiqapp/utag.v.js?a=tealium/main/201306012057&cb=1370276499302

The new cookie value utag_main__ss, is used to determine when to fire. This is only sent on the first event of a session. This request is sent last, after all tags have fired.

URL fragments

key-value pairs found after the # sign are added as qp. variables. This is important for AJAX sites.

Example URL: http://www.example.com?param1=value1&param2=value2#hash1=value3)

Previous:

utag.data = { "qp.param1" : "value1", "qp.param2" : "value2"}

New:

utag.data = { "qp.param1" : "value1", "qp.param2" : "value2", "qp.hash1"  : "value3"}

All page data available to tracking calls

Previously, utag.view and utag.link calls only knew about the data you passed them. Items like b["qp.campaign"] were not available. Now, all “built-in” data points such as URL, meta, or cookie values are added to the data layer for the utag.link and utag.view calls.

Also, dynamic items that may have changed for AJAX sites (such as b["dom.url"]) are re-built so they use the current value. The current value may be different from the value at the time of the initial landing on an AJAX page.

New override settings

Use a JavaScript Code extension scoped to “Pre Loader” and the global variable window.utag_cfg_ovrd.

window.utag_cfg_ovrd = {
    "noview"          : true,
    "lowerqp"         : true,
    "load_rules_ajax" : false
};

Additional settings

• utag.cfg.load_rules_ajax
  Set this flag to false when you do not want to re-evaluate load rules for every utag.view and utag.link call. For utag.view, this may also load a new utag.X.js file if it did not load on the initial page view.
• utag.udoname
  The name of the data object. The utag.js code assumes the data object is a global variable. For example, not an object within another object. By default, this is set to utag_data
• utag.cfg.load_rules_at_wait
  Set this flag to true when you want to re-evaluate load rules at Wait (DOM Ready). This enables legacy support where data may have been set after utag.js loads and you want to use this data to fire a Tag set to wait for DOM Ready.
• utag.cfg.lowerqp
  Set this flag to true if you want to lowercase your query string name/value pairs. This used to be the default behavior.
• utag.cfg.lowermeta
  Set this flag to true if you want to lowercase your meta tags’ names. The value of the name/value pair for the meta tag is not lowercased.
• utag.cfg.noview
  Set this flag to true if you want to control when the initial utag.view call is made. This is common for AJAX sites where your application controls the page view event (not the initial page load action.)

Considerations

• Accidentally Firing Multiple Orders - The utag.link and utag.view calls now have all of the “DOM” type of data points available in every call. For example, the query string data such as b["qp.order_id"] is read on the page load and trigger an order event. However, if you fire a utag.link call on that same order page, it also has the b["qp.order_id"] data set and trigger a second order event.
• For most intuitive behavior, we recommend setting all utag_data values before you load in the utag.js file. And keep utag.cfg.load_rules_at_wait at “false,” which is the default.
• Be aware that updating to utag.js 4.26 changes the default behavior for lower casing your query string params. Values are no longer automatically lower-cased.
• “All Tags”-scoped Extensions may or may not run before DOM Ready-scoped extensions. Order is not guaranteed. If you manipulate a data layer element in an All Tags-scoped extension, then it may affect your Content Modification Extension’s criteria.

Best Practice: Do not modify the original data layer object. If you need to modify a value, use a new variable instead.

Known issues

• The utag_data object becomes a reference to utag.data, and changing one changes the other.
• Internet Explorer 8 may introduce timing issues if your Data Layer is defined at the end of your <body> element, just before DOM Ready (and the utag.js is already loaded). As a best practice, always declare your utag_data object before you load the utag.js file.